Over the years, BESEN has been offering customers high-quality products and efficient after-sales services with the aim of bringing unlimited benefits for them. low power portable ev charging Today, BESEN ranks the top as a professional and experienced supplier in the industry. We can design, develop, manufacture, and sell different series of products on our own combining the efforts and wisdom of all our staff. Also, we are responsible for offering a wide range of services for customers including technical support and prompt Q&A services. You may discover more about our new product low power portable ev charging and our company by directly contacting us.The product helps reduce electronic waste (e-waste) globally. Most of its components and parts are recyclable and reusable for many times.
CORE ADVANTAGEHigh compatibility
High speed charging
Automatically Intelligent Repair
Automatically restart function
Full link temperature control system
EV PLUGIntegrated design
Long working Life
Self filter the surface impurities
Silver plating design of terminals
Real-time temperature monitoring
Heat Sensor guarantee the charging safety
BOX BODYLED display
IK10 Rugged enclosure
Higher waterproof performance
IP66, rolling-resistance system
TPU CABLEComfortable to touch
Durable and preservative
EU standard ,Halogon-free
High and cold temperature resistance
The portable electric car charger belongs to the LEVEL 2 AC charger, and the charging power is generally 3.6kW. In order to prevent potential safety hazards due to incorrect use, please read the equipment manual carefully before use. Do not charge in places that do not meet the charging conditions. Ensure that the power supply and wiring are in a normal state before use.
☆ Do not immerse the device in water.
☆ Do not use it in an environment that exceeds the operating temperature.
☆ Do not put your fingers into the car end plug when the device is connected to the power source.
☆ Do not use when the equipment and cables are found to be damaged.
☆ Do not use the device for charging other than electric vehicles.
☆ The precautions for use include but are not limited to those listed above.
☆ If you are not sure whether it will cause safety hazards, please contact after-sales service in time.
|Electrical Specification||Working Environment|
|Input Voltage||100V AC||Waterproof Protection Degree||IP 66|
|Output voltage||250V AC||Maximum Altitude||<2000m|
|Max. output Current||16A||Environment Temperature||-40℃ ~ +55℃|
|Max. output Power||3.6kW||Relative Humidity||0-95% non-condensing|
|Input Frequency||47~63Hz||Standby Power Consumption||<8W|
|Charging interface type||IEC 62196-2, SAE J1772||Cooling||Natural air cooling|
|Function and Accessory||Certificate|
|LCD||1.8-inch color display||CCC||CSA|
|RCD||Type A / Type A+6mA||IK 10||IP 66|
|LED Indicator light||Rolling|
|Intelligent power adjustment||Yes|
☆ Adjustable Current
Customers could adjust different current as their request. Also the charger which equipped the adaptor could automatically identify different plug types and control the current upper limit to keep safe.
☆ Full Link Temperature Monitoring System
Besen's original "full link" temperature control system can protect the temperature of 75 ° and cut off the current for 0.2S when temperature over 75°.
☆ Automatically Intelligent Repair
The smart chip is equipped to automatically repair common charging errors. It could also restart the power to protect the device from stopping charge caused by voltage fluctuation.
☆ IP66, Rolling-resistance System
Rugged shell which could resist the rolling and crash of the car. IP66 ensure the perfect work outdoors in any environment including rain and snow.
☆ Temperature Monitoring
Real-time monitor is equipped to detect the temperature of the car-end and the wall-end plugs.
Once the temperature is detected above 80℃, the current will be cut off immediately. When the temperature returns below 50℃, charging will resume off.
☆ Battery Protection
Accurate monitoring of PWM signal changes, Effective repair of capacitor units, Maintenance of battery life.
☆ High Compatibility
Fully compatible with all EV in the market.
☆ We can provide customers with professional product advice and purchase options.
☆ All emails will be responded within 24 hours during working days.
☆ We have online customer service in English, French, German and Spanish. You can communicate with ease, or contact us through email anytime.
☆ All customers will get one-on-one service.
☆ We have warehouses throughout Europe and North America.
☆ Samples or test orders can be delivered within 2-5 working days.
☆ Orders in standard products above 100pcs could be delivered within 7-15 working days.
☆ Orders that require customization could be produced within 20-30 working days.
☆ We provide flexible customized services with our abundant experiences in kinds of OEM and ODM projects.
☆ OEM includes color, length, logo, packaging, etc.
☆ ODM includes product appearance design, function setting, new product development, etc.
☆ MOQ is depend on different customized requests.
THE AGENCY POLICY
☆ Please contact our sales department for more details.
AFTER SALE SERVICE
☆ The warranty of all our products is one year. The specific after-sale plan will be free for replacement or charging a certain maintenance cost according to the specific situations.
☆ However, according to the feedback from markets, we seldom have after-sale problems because strict product inspections are carried out before leaving the factory. And all of our products are certificated by top testing institutions such as CE from Europe and CSA from Canada. Providing safe and guaranteed products is always one of our greatest strengths.